Not Sure How To Clean A Juicer?

Not a lot of things can be compared to drinking fresh fruit juice from a juicer. You may be doing this for health reasons or enjoying some juice.

The high quantity of micronutrients ensures many benefits, such as boosting immunity, increasing energy levels, and improving mood.

The efficiency of each juicer depends on the condition of the components. That’s why you need to take the best care of the device, and cleaning is a significant part of the maintenance process.

In this article, you’ll discover everything you need to know on how to clean a juicer. Whether you need to deal with tough stains or want to find the most efficient way to clean up your appliance, you’ve come to the right place!

Why Clean your Juicer?

Juicer owners often use these appliances. Some prefer morning juice, but many people use it more than a few times a day.

This is understandable because the nutrients from these juices boost our energy and overall health.

By keeping your juicer clean, you keep it at the highest level of performance. This will allow you to get the most nutrients each time you use the device. In addition, if the appliance is dirty, it can cause problems with digestion.

Depending on the juicer, these appliances can process small and large pieces of fruit and vegetables. However, the juice pulp and other smaller components cause the most trouble. These enter the hard-to-reach parts and compromise the performance of your machine. You can maximize your health benefits by cleaning everything and getting the best juice out of your appliance.

So let’s explore how to clean a Juicer.

why clean your juicer

A Step by Step Guide to Cleaning a Juicer

It might be tiring to detach and wipe everything every time you make your favorite juice, but trust me, it’ll be worth your time. Not only will you ensure that the appliance is spotless, but you won’t have to deal with tough stains and residues as often.

Regular cleaning means you don’t need to do a deep clean often.

Regular Cleaning

As for the regular cleaning process, you will need the tools listed below:

  • A dish soap – a mild one is preferable.
  • Spatula
  • Soft clothes
  • Toothbrush or a nail brush

Once you’ve got all this ready, follow the steps below.

Step 1: Turn Off and Unplug the Appliance

You should never clean your juicer when it’s plugged into the power socket. That can lead to power surges and other issues that can cause fires, disasters, and other accidents.

Always make sure that you have the cable unplugged. Don’t hesitate to double-check because it’s an important safety issue.

Step 2: Detach the Removable Components

Chances are that at least some of the components of your juicer are detachable. This will depend on the appliance, but look at the manual and remove any removable parts.

You disassemble your juicer because you can reach all the tricky areas and places you might not be able to otherwise clean.

ORFELD Masticating Juicer Auger

Step 3: Trash the Pulp

While processing the juice, your device separates the pulp and removes it into a container. Now is the time to throw away that pulp.

The easiest way to do that is by using a spatula. You will want to be thorough since this pulp can stick inside the container.

At this point, the spatula is your best friend, so make sure you don’t leave any residue. Use a mild soap and warm water to wash the container.

You want to be thorough to ensure that the results are satisfactory. If you notice the hard residue you can’t be removed, it’s a sign that it’s time for a deep-cleaning process.

Step 4: Wash Other remaining Components

You began the process by washing the pulp jar, and now it’s time to start with the other components.

Being as comprehensive as possible is essential. My recommendation is for dish soap to be used, but be gentle. Some pieces are sensitive, and you don’t want any scratch marks or damage from hitting the pieces against the sink.

Don’t forget to rinse each part thoroughly. You don’t want to risk tasting or smelling like soap with your juice! Use lukewarm or warm water, and be patient until all sections have passed through.

You want to pay special attention to your mesh strainer. The odds are there will be some pulp trapped there.

Washing components

Step 5: Use a Toothbrush to Clean the Components

Some manufacturers may supply a specific cleaning brush. Feel free to use it, but a toothbrush is an excellent alternative if you don’t have one. You can even use a nail brush, but remember that it will now be your juicer cleaning brush.

The idea of using a brush is to get to those hidden spots. You can try using your fingers, but chances are you won’t be able to reach every corner of every part.

Step 6: Wipe the Remaining Components

It’s time to turn your attention to parts of the juicer that aren’t removable.

It is critical to note that these components cannot be rinsed under running water. That’s because you can damage the electric motor of the device, the power cord, or other sensitive parts. However, you may still use a soft cloth or a slightly wet sponge.

In my experience, it’s best to dampen soft cloth because it’s very efficient in removing any residue and can’t get too wet like a sponge. Now, it’s essential to wipe the entire base and not miss a single spot. Be patient and use gentle force to wipe away debris and dust.

wiping down your juicer

Step 7: Wait Until All Components Dry and Reassemble the Appliance

Having a drying rack next to your sink is a good idea. You can place all the components you cleaned on the rack that way. Alternatively, you can place a towel on the kitchen counter and allow the parts to dry.

You should also ensure that you give the base enough time to dry, but you don’t have to put it on the rack or the towel. If you are confident that everything is dry, you can start reassuring the components.

Please consult the instruction manual if you have forgotten where the part is going.

The steps you have read above apply to any type of juicer, including centrifugal, masticating, and other types of appliances. However, in the Product Manual, you may have detailed instructions on the cleaning process for your specific unit.

Removing Tough or dried residue

You may begin to note that the outcomes are not as before if you have applied the primary cleaning method many times. The unit isn’t spotless, and you can see a slight stain and residue in a few places.

Occasionally (every few weeks or so), you can deep-clean your device, and any time you neglect to clean the appliance for hours after you finish juicing.

The steps below will show the procedure you can use to remove your juicer’s persistent residue and stains. Let’s check out first to see the supplies you’ll need:

  • Salt
  • Water
  • Denture tablets
  • Enzyme dish liquid

Have you made everything ready? Good, here are the steps to follow in the process.

centrifugal blades

Cleaning Steps

Did you Turn Off and Unplug your Device?

I’m not joking. This is the only and most important safety measure when cleaning a juicer.

Ensure the electrical juicing system is switched off and unplugged from the power socket. If you are sure that the device has been switched off, go ahead and disconnect the removable pieces.

1. Using Enzyme Dish Liquid to remove residue

The technique is the same as the standard method of washing. That means all the components should be rinsed under warm water and washed using dish liquid.

Now you are using a more potent enzyme-based cleaning solution, which should improve the residue removal quality.

Once you finish cleaning, be sure to rinse each part thoroughly. There are powerful chemicals in these liquids, and you want to make sure you’ve washed all of them.

Check each component to see which ones still have residue left. Leave on the drying rack the parts that you have cleaned effectively, and place the still dirty pieces in the sink.

2. Soaking the Dirty Components

Grab a big bowl and place the dirty components inside (or use your sink, just make sure to block the drain to prevent the water from leaving).

Fill the bowl with water until all of the components are thoroughly soaked.

To the water, add two denture tablets and watch them fizz. It might take a little longer, but any trace should be removed by the fizzing action and water.

Make sure to carefully rinse each part until it is clean.

3. Dry and Reassemble the remaining Components

The final step is simple: allow the parts to dry on a towel or drying rack.

Reassemble the appliance until they’re dry and feel free to use it again!

If you have any issues, you should rely on the manufacturer’s instruction manual.

splash juice

Additional Tips to Make Cleaning Your Juicer Faster and More Efficient

Here are some other tips that might make cleaning your juicer more efficient:

  1. Before you clean the machine, always read the instruction manual. That way, you’ll know which pieces are detachable and which you can wash with water. Some of the parts may also be dishwasher-friendly.
  2. Here is an important tip – if you clean your juicer promptly after use, you will save time and effort in the long run.
  3. Save the pulp. Many may disregard the pulp as that which we need to get rid of, but think again. The pulp could still be useful especially to those of us who have gardens, who can still use it to help fertilize the soil.
  4. Toothbrushes can’t get a really tough corner? you can try a toothpick to scrape it out.
  5. Still have stains? In a spray bottle, mix together equal portions of milk and vinegar then stir to combine ingredient. Spray the stain with the mixture to remove it. You can repeat this several times until the stained part is clean.
  6. Do you use your juicer several times a day? Soak your components in a bowl of water between uses and save the cleaning until after your last juicing.

Conclusion – Boost Your Health with a Clean Juicer

Juicers are handy devices that can boost your health and deliver a delicious drink whenever needed. You can choose between thousands of recipes until you find your favorite recipes.

It is vital to take proper care of your juicer during the process. This includes cleaning it after every use and going through a deep-cleaning process occasionally. Specific components, such as plastic parts and mesh filters, may require special care.

If you want the best results from the basic cleaning process, you should start cleaning the device as soon as you’re finished with juicing. That way, you’re not giving any time to build up the residue, and it’s going to be easy to remove any grime.

And now you know how to clean a juicer.

Please Share With Your Friends and Family!

Help others find our content by clicking on the social sharing buttons below.

Thanks you for supporting us.

What's Next?

Don’t have a juicer?  Get one of the 6 best for the money!

Pin It on Pinterest

Share This